Social

Share

PRODUCTS
Home » Products » Fully Automated Cup Style Molded Mask Production Line
Show results
Show products
Show subcategory
Back
  • Sanitary Napkin
    • Cotton Sanitary Napkin
    • Baiyunshan series sanitary pads
    • Menstrual panty
  • Tampon
  • Sanitary Pads Machine
    • Sanitary Napkin Machine
    • Other Machines
  • Adult Diaper
Show categories
PRODUCT CENTER
Choose a category or subcategory
Share to:

Fully Automated Cup Style Molded Mask Production Line

This equipment is used for fully automatic cup-shaped mask production line (typical model such as N95 mask), the equipment is full roll feeding, multi-layer spunlace cloth, melt-blown cloth, non-woven fabric rolls are cut into hot press forming, melt blown cloth cold Compression molding, ultrasonic welding and fusion, and finally the mask is trimmed and formed, automatically attached to the foam, automatically hot pressed the nose strip, automatically welded by the ear band, and automatically printed out the finished product. The production of masks is comfortable to wear, without a sense of pressure, and the mask has a good filtering effect, which fits the shape of a person's face, and can be used in medical, electronics, mining, construction and other industries. This machine adopts PLC, touch screen control, and the main conveyor belt adopts imported servo motor for transportation, precise transmission, stable control, and adjustable speed.
Quantity:
  • JX-FA-C01
  • 8449009000

Fully Auto Cup Mask Production Equipment Function Introduction
This equipment is used for fully automatic cup-shaped mask production line (typical model such as N95 mask), the equipment is full roll feeding, multi-layer spunlace cloth, melt-blown cloth, non-woven fabric rolls are cut into hot press forming, melt blown cloth cold Compression molding, ultrasonic welding and fusion, and finally the mask is trimmed and formed, automatically attached to the foam, automatically hot pressed the nose strip, automatically welded by the ear band, and automatically printed out the finished product.
   The production of masks is comfortable to wear, without a sense of pressure, and the mask has a good filtering effect, which fits the shape of a person's face, and can be used in medical, electronics, mining, construction and other industries.
This machine adopts PLC, touch screen control, and the main conveyor belt adopts imported servo motor for transportation, precise transmission, stable control, and adjustable speed.
Fully Auto Cup Mask Production Equipment Features
1. It is welded with cast iron and painted, which is beautiful and firm without rusting.
2. Computer PLC (Mitsubishi PLC) programming control, high stability, low failure rate and low noise.
3. It adopts imported servo motor and imported pneumatic components with high precision.
4. Photoelectric detection of raw materials to avoid errors and reduce waste.
5. The machine adopts slide rails and fixed feet, which is convenient and quick to move, strong in fixity, and does not shake
Fully Auto Cup Mask Production Equipment Paremeter:

Machine size:8500 (L) × 3100 (W) × 2800 (H)mm
Machine weight:≤2300KG  The ground bearing400KG/
Capactiy:55-60PCS/min
Voltage:220VAC±5% 50HZ  ground protection 
Air compression0.4-0.6MP(Water - free, oil - free, filtered, stabilized clean air) Usage flow: about 300L/min
Main Parts:Cylinder:AirTAC 
Screw guide:HIWIN/TBI
PLC:Mitsubishi or Xinjie
Power:  ≤10KW(Including welding machine)
Equipment production yield: ≥97%(Unless caused by raw materials or human operation)
Using environmentGeneral workshop environment (no corrosive smell, no dust)


FAQ

  • Q Is it difficult to operate the mask machine? What is the productivity?

    A Jinxin mask machine equipment manufacturer is a research and development, production, sales in one of the non-woven fabric deep processing machinery manufacturers, for a variety of mask machine semi-automatic equipment and fully automated equipment, its operation steps are too complex, what are the production steps of masks?
    Production steps of mask:

    1). The inner layer of the mask is formed, and the shape of the mask is made by hot pressing with the shaping cotton;
    2). The outer mask can be formed by using non-woven cloth, fusible spraying cloth, activated carbon non-woven cloth and other materials to make flap mask;
    3). Multi-mask pressing, the inner and outer mask pressing, usually three to five layers of hood molding;
    4). Cut the edge, cut out the excess edge of the pressed mask to leave the complete shape of the mask
    5). The nose line is fitted. The mask can use the nose line to adjust the wearing position.
    6). The ear band shall be welded. The ear band shall be welded to both ends of the mask.
    7). Procedures of mask processing, packaging and disinfection

    The above is the mask machine production mask steps, in fact, the operation is relatively simple, direct feeding boot can, but the machinery to remember regular maintenance and maintenance, mask production can be perfectly solved.
  • Q How can we know the quality of your machine?

    A

    Customers can send material to us and then we use our machine to manufacture finished products which will be re-sent to customers.

  • Q What's the machine lead time?

    A

    For the standard machines, we can delivery within 15 days. If it is customized by customer(OEM), the lead time is 20-30 days.

  • Q Is it difficult to install the machine?

    A

     The work shop should prepare full facility such as power and air compressor. For the first installation, engineer will be sent to set machine and do the machine training as long as manual instruction. For the further problems come out, we can provide video instruction as well.

  • Q How is the after sales service?

    A

    We provide 1 year guaranty and technical support lifetime. Main machine's parts can be replaced for free within 1 year if broken(excluding error operation ).

Related Products

Call Us Now
Phone #1:
+86 13688983184
Phone #2:
+86 18688277556
Phone #3:+86 18688233515
Phone #4:+86 18688233551
Send a Message
Sales department: 
sales@jxautomachine.com
Support: 
sales01@jxautomachine.com
Main Office
   No.89 Dabu Industrial Zone, Lishui  Town, Nanhai District, Foshan City, Guangdong, China.
Weekdays: 
9:00-21:00
Weekends: 
9:00-18:00
We have an excellent technical team, which can be designed according to customers requirements.We have an excellent technical team, which can be designed according to customers requirements.
Subscribe Now
Incorrect email SEND
Jinxin (Foshan) Intelligent Automation Technology Co., Ltd.
Follow Us